User guide

36
Chapter 3 - Software Loading and Configuration
Deploy the VOIP Network
Deploying the VOIP network involves the VOIP Administrator developing the VOIP Dialing Directory
and deploying the pre-configured client MultiVOIPs to their remote sites. The remote site
administrators need only connect power to the pre-configured MultiVOIP, connect it to their Ethernet
LAN and predefined telephone equipment, and then wait for the phone directory database to be
downloaded.
Perform the following procedure to deploy your VOIP network.
VOIP Administrator
1. Establish your VOIP Dialing Directory based on your Phone Directory Database for the num-
bers to connect the MultiVOIPs to your VOIP network and the telephone extension number
you need to connect to the Voice/Fax channels. A sample VOIP Dialing Directory is provided
below for your consideration and use.
To call from
Call Process
Dialing
Sequence
VOIP Dialing Directory
2. Send the client MultiVOIPs to their remote sites.