User guide

30
Chapter 3 - Software Loading and Configuration
35. Enter the IP address of the client MultiVOIP in the IP Address box in the MultiVOIP Identifi-
cation group. For example, 202.56.39.100.
36. Click OK and you are returned to the Phone Directory Database dialog box, which now
includes the second number and related information in the Phone Number list.
Note: If only Channel 1 is active, you must enter two phone numbers. The first number will be
the local MultiVOIP phone number for Channel 1, and the second number will be the client
MultiVOIP phone number for Channel 1.
If both Channels 1 and 2 are active, four phone numbers will have to entered.
37. When you have finished, click OK to download the setup configuration to the MultiVOIP.
38. The Checking MultiVOIP dialog box displays.
Click OK to proceed.
39. After the setup is written to the MultiVOIP, the unit is rebooted.
40. Verify that the BOOT LED on the MultiVOIP is off after the download is complete. This may
take several minutes as the MultiVOIP reboots.
41. You are returned to your MultiVOIP folder which is open and visible on your desktop.
At this time, your host MultiVOIP is configured. Proceed to the next section to configure the client MultiVOIPs.