User guide

29
Chapter 3 - Software Loading and Configuration
30. In the MultiVOIP Identification group, enter the IP address of the Host MultiVOIP in the IP
Address box. For example, 204.22.122.118. Then obtain the 12-digit Node ID#
(0008005xxxxx) from the ID plate on the back panel of the MultiVOIP and enter this number in
the Ethernet Node ID box. If the ID plate is missing or damaged, you can also Telnet to the
MultiVOIP and, on the MultiVOIP Telnet Server menu enter 1 to advance to the Main Menu,
then enter 3 for System Information where item 1 is the Ethernet Port Address you want to
enter in the Ethernet Node ID box.
31. Click OK and you are returned to the Phone Directory Database dialog box, which now
includes phone number 101 with its IP address, channel number, and description.
32. Click Add and the Add/Edit Phone Entry dialog box displays again.
33. Enter the phone number for the client MultiVOIP in the Station Information group Phone
Number box. For example, 201.
34. Enter a description for the client MultiVOIP phone number for Channel 1 in the Description
box.
Note: If the remote MultiVOIP is located behind a proxy server that uses a dynamically
assigned IP address, select Dynamic (disabling Static IP Address) and leave the IP Address
box blank. The Host MultiVOIP will learn the IP address when it is contacted by the client
MultiVOIP.