User guide

MultiVOIP Quick Start Guide
64
If your H.323 endpoint is not a MultiVOIP 200 (e.g., a PC with
NetMeeting software), the Systems Administrator for your
VOIP network should do the following.
1. Make certain that the H.323 endpoint (e.g., PC with
NetMeeting, router with voice, etc.) have been properly
connected to the network. Refer to the appropriate end
user documentation.
2. Acquire the relevant IP Addresses and/or H323 IDs (H323
IDs are required if Gatekeeper is enabled) from the other
H.323 endpoints that will participate in H.323 calls.
3. Enter these IP Addresses and H323 IDs (H323 IDs are
required if Gatekeeper is enabled) in your phonebook
directory.