User guide

59
Configuring MultiVOIP Slaves
18. From the Main menu, click Phone Book to display the
Phone Directory Database dialog box. Make certain the
Proprietary Phonebook option is enabled and in the
Database Type group, click the Client option. The Host IP
Address field becomes active.
Note: After you have enabled the Client option, the Client
Status button is replaced by the Update button. Once your
Phone Directory database has been established, you can
click this button to refresh the entries in the Phone
Directory Database window.
19. Enter the IP address (204.022.122.118) of the New York
Office MultiVOIP 200 in the Host IP Address field and
enable the Send Status Report to Host so that status
reports are sent to the Host MultiVOIP 200.
Note: In a Dial-On-Demand (DOD) network, you should
leave Send Status Report to Host disabled (not
checked). This allows the router to disconnect whenever
there is no voice activity. Note that Clients with Send
Status Report to Host disabled will show up as
“Unknown” when viewing Client status on the Host.