User guide
MultiVOIP Quick Start Guide
36
Building a Proprietary Phonebook Directory
27. To build your proprietary MultiVOIP 200 Phone Directory
(i.e., in an H.323 environment without the Gatekeeper
option enabled), you will first need to enable (check) the
Proprietary Phonebook option and then configure the
“Host” MultiVOIP 200 and then add the “Client” MultiVOIP
200s (or other H.323 endpoints). Configuring the “Client”
MultiVOIP 200 is discussed later.
The first MultiVOIP 200 to be configured is designated the
“Host” and contains the proprietary phonebook database.
All subsequent MultiVOIP 200s added to the proprietary
phonebook database are designated “Clients.” The Host
database contains the phone numbers of all H.323
endpoints available for communication on an IP network.
This database is downloaded to each Client MultiVOIP 200
as it comes on-line.
28. To configure the “Host” MultiVOIP 200, make certain that
the Proprietary Phonebook and Host options are
enabled. The Host IP Address, Send Status Report to
Host, and RAS Parameters group will be disabled (grayed
out).