User guide

41
Chapter 4 - MultiVOIP Software
MultiVOIP Configuration
The MultiVOIP Setup menu consists of 10 buttons in which you can point and click, an Events
window in the middle of the menu, and a status bar at the bottom of the menu. The 10 buttons allow
you to display and change the voice channels and IP protocol parameters, display and manage the
Phone Book listing, define the output of the MultiVOIP, view statistics and call progress, and change
features such as SNMP Agent, Telnet Server, WEB Server, and assign a MultiVOIP password.
The Events window, in the center of the window provides information about the boot process.
The status bar at the bottom of the Setup menu displays the status of the unit, e.g., Running, the date
that the unit was configured, the type of connection on the command port, e.g., if the pc connected to
the command port is using its serial port to communicate with the MultiVOIP or if the pc is
communicating with the MultiVOIP via an Ethernet connection. The last field on the status bar is the
Rights field which displays either Read/Write or Read only rights. The first user to communicate with
the MultiVOIP has Read/Write rights. This enables the first user to change the configuration of the
MultiVOIP. A second user has read only rights which means they can only display the configuration
of the MultiVOIP.