User guide

11
Cabling
Phillips quarter-turn screws and replace the four Phillips
screws on the back and the four Phillips screws on the
bottom.
8. If you are using a Magix 400 E&M Tie Card, connect the
ground pin to the chassis ground screw as shown.
PIN NO.
6
3
1
4
5
2
1
2
3
4
5
6
7
8
PIN NO.
Male Male
MVP 400/800
Connection
Magix 400 E&M 4
Wire Tire Card
M MOUTH CONTROL
E EAR CONTROL
T1 TIP 1 RECEIVE
R RING TRANSMIT
T TIP TRANSMIT
R1 RING 1 RECEIVE
CHASSIS GROUND SCREW
UNUSED
M INPUT
E OUTPUT
T1 4-WIRE OUTPUT
R 4-WIRE INPUT, 2-WIRE
T 4-WIRE INPUT, 2-WIRE
R1 4-WIRE OUTPUT
SG (SIGNAL GND) OUTPUT
SB (SIGNAL BATTERY OUTPUT
9. Return to the Cabling Procedure.