User guide

MultiVOIP Quick Start Guide Phonebook Starter Config.
19
6. Tally up the number of digits that must be dialed to reach the remote
voip site (including prefix digits of all types). Enter this number in
the “Total Digits” field.
North America,
Long-Distance Example
Euro, National Call
Example
Seattle-Chicago system.
To complete Seattle-to-
Chicago call, 81312 must be
followed by the 7-digit local
phone number in Chicago.
Answer: enter 12 as number
of Total Digits in
Outbound Phone-
book of Seattle
voip.
London/Birming. system.
To complete London-to-
Birmingham call, 90121 must be
followed by the 7-digit local
phone number in Birmingham.
Answer: enter 12 as number
of Total Digits in
Outbound Phone-
book of London
voip.
Euro, International Call Example
Rotterdam/Bordeaux system.
To complete Rotterdam-to-Bordeaux call, 903305 must
be followed by 8-digit local phone number in Bordeaux.
Answer: enter 14 as number of Total Digits in
Outbound Phonebook of Rotterdam voip.
7. In the “Remove Prefix” field, enter the initial PBX access digit (“8” or
“9”).
North America,
Long-Distance Example
Euro, National Call
Example
Seattle-Chicago system.
Answer: enter 8 in “Remove
Prefix” field of
Seattle Outbound
Phonebook.
London/Birming. system.
Answer: enter 9 in “Remove
Prefix” field of
London Outbound
Phonebook.
Euro, International Call Example
Rotterdam/Bordeaux system.
Answer: enter 9 in “Remove Prefix” field of Outbound
Phonebook for Rotterdam voip.
Some PBXs will not ‘hand off’ the “8” or “9” to the voip. But for those PBX
units that do, it’s important to enter the “8” or “9” in the “Remove Prefix”
field in the Outbound Phonebook. This precludes the problem of having to
make two inbound phonebook entries at remote voips, one to account for
situations where “8” is used as the PBX access digit, and another for when
“9” is used.