User guide

Chapter 3: Software Installation
Multi-Tech Systems, Inc. 21
T1/E1/ISDN Parameters
The T1, E1 or ISDN parameters are the settings that pertain to the connection type that the MultiVOIP will attach
to. The MVP2410 is designed to operate under North American or T1 standards; the MVP3010 is designed to
operate under European or E1 standards
ISDN Parameters (if applicable) are accessible in the T1/E1/ISDN Parameters screen. If your T1 or E1 phone
line is a Primary Rate Interface ISDN line, enable ISDN-PRI and set it for the particular implementation of ISDN
that your telco uses.
The J1 setting has specific settings to work with connections typically used in Japan.
Figure 3-10: Connection Type parameters