User guide

Appendix D: Regulatory Information
Multi-Tech Systems, Inc. 124
FCC Part 68 Telecom
This equipment complies with part 68 of the Federal Communications Commission Rules. On the outside surface
of this equipment is a label that contains, among other information, the FCC registration number. This information
must be provided to the telephone company.
As indicated below, the suitable jack (Universal Service Order Code connecting arrangement) for this equipment
is shown. If applicable, the facility interface codes (FIC) and service order codes (SOC) are shown.
An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed
to be connected to the telephone network or premises wiring using a compatible modular jack that is Part 68
compliant. See installation instructions for details.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. If advance notice is not practical, the telephone company
will notify the customer as soon as possible.
The telephone company may make changes in its facilities, equipment, operation, or procedures that could affect
the operation of the equipment. If this happens, the telephone company will provide advance notice to allow you
to make necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment (the model of which is indicated below), please contact Multi-Tech
Systems, Inc. at the address shown below for details of how to have repairs made. If the equipment is causing
harm to the network, the telephone company may request you to remove the equipment form t network until the
problem is resolved.
No repairs are to be made by you. Repairs are to be made only by Multi-Tech Systems or its licensees.
Unauthorized repairs void registration and warranty.
Manufacturer: Multi-Tech Systems, Inc.
Trade name: MultiVOIP
Model number: MVP-210/410/810
FCC registration number: US: AU7DDNAN46050
Modular jack (USOC): RJ-48C
Service center in USA: Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, MN 55112
Tel: [phone]
FAX: [phone]
Industry Canada
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A
respecte toutes les exigences du
Reglement Canadien sur le matériel brouilleur.
Canadian Limitations Notice
Notice: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain
telecommunications network protective, operational and safety requirements. The Department does not guarantee the
equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer
should be aware that compliance with the above conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier.
Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and
internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural
areas.
Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric
inspection authority, or electrician, as appropriate.