User guide

Chapter 4 – Configuring Your MultiVOIP
MultiVOIP® Voice/Fax over IP Gateways 81
Example. Suppose a VOIP system has offices in both Denver and Omaha. In the Omaha VOIP unit (the
‘home’ VOIP unit in this example), Call Name Identification has been enabled, Connected Party has been
enabled as an Allowed Name Type, and “Omaha Sales Office Voipchannel 2” has been entered in the Caller
Id field of the Supplementary Services window.
When channel 2 of the Omaha VOIP completes an attempted call from any other VOIP phone station (for
example, the Denver office), the message “Connect Party - Omaha Sales Office Voipchannel 2” is sent back
and appears in the Caller Id field of the Statistics – Call Progress window of the Denver VOIP. This confirms
to the Denver VOIP that the call has been completed to Omaha.
Caller ID
This is the identifier of a specific channel of the ‘home’ VOIP unit. The Caller Id field typically describes a
person, office, or location, for example, “Harry Smith,” or “Bursar’s Office,” or “Barnesville Factory.”
Default
When this button is clicked, all Supplementary Service parameters are set to their default values.
Copy Channel
Copies the Supplementary Service attributes of one channel to another channel. Attributes can be copied to
multiple channels or all channels at once.