User guide

Chapter 4 – Configuring Your MultiVOIP
MultiVOIP® Voice/Fax over IP Gateways 75
The table that follows describes the fields of the RADIUS window.
RADIUS Window Field Definitions
Field Name
Values
Description
Enable Accounting
Y/N
When checked, the MultiVOIP accesses the accounting functions of the RADIUS
server.
Server Address
n.n.n.n
IP address of the RADIUS server that handles accounting (billing) for the current
MultiVOIP unit.
Accounting Port
1 - 65535
TDM time slot at which RADIUS accounting information is transmitted and received.
Retransmission
Interval
If the MultiVOIP sends out a packet to the RADIUS server and doesn't receive a
response in the retransmit interval, it retransmits that packet again and waits the
retransmit interval again for a response. How many times it does this is determined
by the setting in the Number of Retransmissions field.
Number of
Retransmissions
0 - 255
Shared Secret
alpha-numeric
Client encryption key for the current VOIP unit.
Select Attributes
(button)
--
Gives access to RADIUS Attributes window. On Attributes window, one can specify
the parameters to be tallied by the RADIUS server for accounting (usually billing)
purposes.
A secondary RADIUS dialog box, RADIUS Attributes, helps you customize accounting information that the
MultiVOIP sends to the RADIUS server. The MultiVOIP software logs data about many aspects of the call traffic
going through the MultiVOIP. The RADIUS Attributes window lets you select the items to include in the
accounting reports sent to the RADIUS server.
“RADIUS Attributes” Definitions
Field
Description
Field
Description
Select All
Log report to include all fields
shown.
Start Date, Time
Date and time the phone call began.
Channel
Number
Data channel carrying call.
Call Mode
Voice or fax.
Duration
Length of call.
Packets Received
Total packets received in call.
Packets Sent
Total packets sent in call.
Bytes Received
Total bytes received in call.
Bytes Sent
Total bytes sent in call.
Coder
Voice Coder /Compression Rate used for call is
listed in log.
Packets Lost
Packets lost in call.
Prefix Matched
When selected, the phonebook prefix matched
in processing the call is listed in log.
Outbound
Digits Sent
DTMF digits received by this
gateway from remote gateway (if
that DTMF set to "Out of Band").
Call Status
Successful or unsuccessful.
Server Details
The IP address of the traffic control server being used is displayed here if the call is handled through that
server. The Options field refers to non-mandatory server features that might be activated. For example, with
H.323, various H.323 Version 4 options might be listed.
From Details
To Details
Gateway
Number
Originating gateway
Gateway
Name
Completing or answering gateway
IP Address
IP address where call originated.
IP Address
IP address where call was completed/answered.
Descript
Identifier of where call originated.
Descript
Identifier of where call was completed/answered.
Options
When selected, log does not use Silence
Compression and Forward Error
Correction by call originator.
Options
When selected, log does not use Silence Compression
and Forward Error Correction by party answering call.