User guide

Chapter 4 – Configuring Your MultiVOIP
MultiVOIP® Voice/Fax over IP Gateways 61
registrations.
Accept
Registrations
for:
n.n.n.n
-or-
any IP
addresses
Determines if registrations to the MVP-SS SIP server are accepted from any
IP address or only from specified IP addresses. Multiple IP addresses can be
listed (separated by semicolon). The “any IP addresses” option is intended
for private networks not accessible via Internet or PSTN.
IP Addresses
n.n.n.n
List of IP addresses (separated by semicolon) of endpoints from which the
MVP-SS accepts registrations.
Re-Registration
Time
in
seconds;
(default is
3600)
The time after which the UserAgent Client registers with the proxy server.
Expired registration indicates the gateway lost contact with the main SIP
server and that the MVP-SS unit enters ‘survivability’ mode. In this mode,
the MVP-SS unit completes calls acting as a backup to the main SIP server.
Normally, the MVP-SS initiates re-registration before the interval lapses.
SIP Server: Predefined Endpoint Parameters.
Use the SIP Server Endpoints window to specify the VOIP gateways that depend on the MVP-SS unit:
● As their primary SIP server (if the MVP-SS is used in “Stand-Alone” mode, as set in the SIP Server |
Configuration window) or
● As their backup SIP server (if the MVP-SS is used in “Survivability” mode, as set in the SIP Server
|Configuration window).
The main window for Predefined Endpoints is a list. If you click Add or Edit for entries in this list, a secondary
window appears where you can add new endpoints or edit existing ones.
When your work with the list is complete, click Save.