User guide

Chapter 3 – Installing Software
26 MultiVOIP® Voice/Fax over IP Gateways
13. In the Pass Through Options group select Enable to create an open audio patch; not for use with Wink
signaling.
14. In the DID Options group: (not supported by –SS and –FX series)
● From Start Modes drop-down list, select Immediate, Wink or Delay Dial.
● In the Wink Timer field type time, in milliseconds.
Setting Call Signaling
There are three choices for Call Signaling: H.323, SIP and SPP, the –SS models only support SIP and the –FX
models support SIP and SPP, but not H.323. It is best to select one of these as the protocol to be used, rather
than mixing them. Single Port Protocol (SPP) is a non-standard protocol created by Multi-Tech that allows
dynamic IP allocation. Generally, the default settings do not work for most users. If necessary you can change
individual parameters. Chapter 4 provides details for all settings.