User guide

Chapter 3 – Installing Software
22 MultiVOIP® Voice/Fax over IP Gateways
9. Enter DNS Server IP Address
10. If desired, check the Enable SRV checkbox.
11. The Diff Serv Parameters group helps you specify settings for routers that are Diff Serv compatible
Setting both values to 0 effectively disables Diff Serv.
12. FTP Server Enable is only needed for firmware and software updates to the MultiVOIP.
13. If desired, check the TDM Routing checkbox.
Setting Voice/Fax Parameters
You must configure the individual channels before using your unit. If channels have the same parameters, you
can use the Copy Channel button to save time. You can note some options for future changes if necessary, but
default settings likely work, without adjustment.