User guide

Chapter 6—Using the Software
132 MultiVOIP® Voice/Fax over IP Gateways
Setting and Downloading User Defaults
The Download User Defaults command allows you to maintain a known working configuration that is specific to
your VOIP system. You can then experiment with alterations or improvements to the configurations, and restore
a working configuration if necessary.
1. Before using the Download User Defaults command, save a set of configuration parameters. To do so, use
the Save Setup command in the sidebar menu of the MultiVOIP software.
2. Before the setup configuration is saved, you are prompted to save the setup as the User Default
Configuration. Select the checkbox and click OK.
A user default file is created. The MultiVOIP unit reboots itself.
3. To download the user defaults, go to Start | Programs | MultiVOIP x.xx | Download User Defaults.
4. A dialog box appears indicating that this action entails rebooting the MultiVOIP.
Click OK.
5. Progress bars appear during the file transfer process.
6. When the file transfer is complete, the Dialog window appears.
7. Set the IP values appropriate to your VOIP system. Click OK. Progress bars appear as the MultiVOIP reboots
itself.