User guide

Chapter 5 — Phonebook Configuration
Multi-Tech Systems, Inc. 70
Phone Book Save and Reboot
When Outbound and Inbound Phonebook entries are completed, click on Save Setup in the sidebar menu to
save your configuration. You can change your configuration at any time as needed for your system.
Remember that the initial MultiVOIP setup must be done locally or via the built-in Remote
Configuration/Command Modem using the MultiVOIP program. After the initial configuration is complete, all of
the MultiVOIP units in the VOIP system can be configured, re-configured, and updated from one location using
the MultiVOIP web interface software program or the MultiVOIP program (in conjunction with the built-in
modem).
Phonebook Examples
North America
The following example demonstrates how Outbound and Inbound Phonebook entries work in a situation of
multiple area codes. Consider a company with offices in Minneapolis and Baltimore.
Notice first the area code situation in those two cities: Minneapolis’s local calling area consists of multiple
adjacent area codes; Baltimore’s local calling area consists of a base area code plus an overlay area code.
Mpls
612
NW
Suburbs
763
St. Paul
& Suburbs
651
SW Suburbs
952

Company
VOIP/PBX
SIte

Baltimore
410
Baltimore/
Outstate MD
Overlay
443
Company
VOIP/PBX
SIte
...
North America example