User guide

Chapter 5 — Phonebook Configuration
Multi-Tech Systems, Inc. 62
North America,
Long-Distance Example
Euro, National Call Example
Euro, International Call Example
Seattle/Chicago system.
Seattle is area 206. Chicago
employees must dial 81 before
dialing any Seattle number on
the VOIP system.
Answer: 1206 is prefix to be
removed by local
(Seattle) VOIP.
London/Birmingham system.
Inner London is 0207 area.
Birmingham employees must
dial 9 before dialing any London
number on the VOIP system.
Answer: 0207 is prefix to be
removed by local
(London) VOIP.
Rotterdam/Bordeaux system.
Rotterdam is country code 31,
city code 010. Bordeaux
employees must dial 903110
before dialing any Rotterdam
number on the VOIP system.
Answer: 03110 is prefix to be
removed by local
(Rotterdam) VOIP.
4. In the “Add Prefix” field, enter any digits that must be dialed from your local VOIP to gain access to the
PSTN.
North America,
Long-Distance Example
Euro, National Call Example
Euro, International Call Example
Seattle/Chicago system.
On Seattle PBX, “9” is used to
get an outside line.
Answer: 9 is prefix to be added
by local (Seattle) VOIP.
London/Birmingham system.
On London PBX, “9” is used to
get an outside line.
Answer: 9 is prefix to be added
by local (London) VOIP.
Rotterdam/Bordeaux system.
On Rotterdam PBX, “9” is used
to get an outside line.
Answer: 9 is prefix to be added
by local (Rotterdam)
VOIP.
5. In the “Channel Number” field, enter “Hunting.” A “hunting” value means the VOIP unit will assign the call to
the first available channel. If desired, specific channels can be assigned to specific incoming calls (that is, to
any set of calls received with a particular incoming dialing pattern).
6. In the “Description” field, it is useful to describe the ultimate destination of the calls. For example, in a New
York City VOIP system, “incoming calls to Manhattan office,” might describe a phonebook entry, as might
the descriptor “incoming calls to NYC local calling area.” The description should make the routing of calls
easy to understand. For this, 40 characters are the maximum.
North America,
Long-Distance Example
Euro, National Call Example
Euro, International Call Example
Seattle/Chicago system.
Possible Description:
Free Seattle access, all
employees
London/Birmingham system.
Possible Description:
Local-rate London access, all
employees
Rotterdam/Bordeaux system.
Possible Description:
Local-rate Rotterdam access, all
employees
7. Repeat steps 2-6 for each inbound phonebook entry. When all entries are complete, go to step 8.
8. Click OK to exit the inbound phonebook screen.
9. Click on Save Setup. Highlight Save and Reboot. Click OK.
Your starter inbound phonebook configuration is complete.