User guide

Chapter 4—Configuring your VOIP
Multi-Tech Systems, Inc. 52
Field
Description
Field
Description
Select All
Log report to include all fields
shown.
Start Date, Time
Date and time the phone call began.
Channel
Number
Data channel carrying call.
Call Mode
Voice or fax.
Duration
Length of call.
Packets Received
Total packets received in call.
Packets Sent
Total packets sent in call.
Bytes Received
Total bytes received in call.
Bytes Sent
Total bytes sent in call.
Coder
Voice Coder /Compression Rate used for call
will be listed in log.
Packets Lost
Packets lost in call.
Prefix Matched
When selected, the phonebook prefix matched
in processing the call will be listed in log.
Outbound
Digits Sent
DTMF digits received by this
gateway from remote gateway (if
that DTMF set to "Out of Band").
Call Status
Successful or unsuccessful.
Server Details
The IP address of the traffic control server being used will be displayed here if the call is handled through that
server. The Options field refers to non-mandatory server features that might be activated. For example, with
H.323, various H.323 Version 4 options might be listed.
From Details
To Details
Gateway
Number
Originating gateway
Gateway
Name
Completing or answering gateway
IP Address
IP address where call originated.
IP Address
IP address where call was completed/answered.
Descript
Identifier of where call originated.
Descript
Identifier of where call was completed/answered.
Options
When selected, log will not use Silence
Compression and Forward Error
Correction by call originator.
Options
When selected, log will not use Silence Compression
and Forward Error Correction by party answering call.
Logs/Traces
The Logs/Traces screen lets you choose how the VOIP administrator will receive log reports about the
MultiVOIP’s performance and the phone call traffic that is passing through it. Log reports can be received in one
of three ways:
● in the MultiVOIP program (interface),
● through email (SMTP)
● at the MultiVOIP Manager remote VOIP system management program (SNMP).
Logs and Filters screens