User guide

Chapter 4—Configuring your VOIP
Multi-Tech Systems, Inc. 50
Received
gateway from the remote gateway
presuming that DTMF is set to "Out of
Band."
for the call (H.323, SIP, or SPP).
Call Status
Successful or unsuccessful.
DTMF
Capability
Indicates whether the DTMF dialing digits
are carried "Inband" or "Out of Band." The
corresponding field values differ for the 3
different VOIP protocols.
For H.323, this field can display "Out of
Band" or "Inband". For SIP it can display
either "Out of Band RFC2833" or "Out of
Band SIP INFO" to indicate the out-of-
band condition or "Inband" to indicate the
in-band condition. For SPP it can display
"Out of Band RFC2833" or "Inband".
Call Direction
Indicates call’s originating party.
Server Details
The IP address of the traffic control server
(if any) being used (whether an H.323
gatekeeper, a SIP proxy, or an SPP registrar
gateway) will be displayed here if the call is
handled through that server.
Disconnect Reason
Indicates whether the call was
disconnected simply because the desired
conversation was done or some other
irregular cause occasioned disconnection
(for example, a technical error or failure).
Values are "Normal" and "Local"
disconnection.
Outbound
Digits Sent
The dialing digits sent by this gateway to
the remote gateway presuming that
DTMF is set to "Out of Band.”
From Details
To Details
Gateway Number
Originating gateway
Gateway Name
Completing or answering gateway
IP Address
IP address where call originated.
IP Address
IP address where call was completed or
answered.
Descript
Identifier of site where call originated.
Descript
Identifier of site where call was completed
or answered.
Options
When selected, log will not Silence
Compression and Forward Error Correction
by call originator.
Options
When selected, log will not use Silence
Compression and Forward Error
Correction by party answering call.
RADIUS
In general, RADIUS is concerned with authentication, authorization, and accounting. The MultiVOIP supports the
accounting and authentication functions. The accounting function is well suited for billing of VOIP telephony
services. In the Select Attributes secondary screen (accessed by clicking on Select Attributes button), the VOIP
administrator can select the parameters to be tallied by the RADIUS server.