User guide

Chapter 3—Software Installation
Multi-Tech Systems, Inc. 16
Interface Parameters
Actions:
1. Select Channel
a. Select Interface Type: FXS, FXO, or DID (FXS only for the MVP130-FXS)
b. Regeneration
● Choose how signal is regenerated; as Pulse or DTMF
c. Inter Digit Timer
● Time the MultiVOIP waits between digits
d. Message Waiting Indication is available if desired
e. Inter Digit Regeneration Timer
● Length of time between sent DTMF digits
2. Flash Hook Options
a. Generation (used in conjunction with FXO)
b. Detection Range (used in conjunction with FXS)
3. Caller ID