User guide

Chapter 3—Software Installation
Multi-Tech Systems, Inc. 13
Ethernet/IP
For basic operation, you need a unique LAN IP address the MultiVOIP, a subnet mask, and Gateway IP. Other
settings in this category pertain to specific features and protocols that can be used, but are not necessary for
basic operation. Details for all settings are provided in chapter 4.
IP settings
Actions
1. If used, select Packet Prioritization and set 802.1 Priority Parameters as needed.
● Priority levels can be from 0 – 7, where 0 is lowest priority (details in Chapter 4)
● VLAN ID identifies a virtual LAN by a number (1 to 4094)
2. Set the Frame Type to match the network. Options are TYPE II or SNAP.
3. Enter Gateway Name and if used, check to enable DHCP.
4. Enter IP Address.
5. Enter Subnet IP Mask.
6. Enter Gateway IP.
7. Enable DNS if desired. If enabled, enter the DNS Server IP Address.
8. Enable SRV support if needed.
9. Diff Serv Parameters are for routers that are Diff Serv compatible.
Note: Setting both values to 0 effectively disables Diff Serv
10. TDM Routing can be used if necessary