User guide

Phonebook Starter Config.
33 MultiVOIP Quick Start Guide
Inbound Phonebook
1. Open the MultiVOIP program.
Start |MultiVOIP xxx |Configuration
2. Go to Phone Book |PhoneBook Modify |Inbound
Phonebook |Add Entry.
3. In the “Remove Prefix” field, enter your local calling
code (area code, country code, city code, etc.)
preceded by any other “access digits” that are
required to reach your local site from the remote
voip location(think of it as though the call was being
made through the PSTN – even though it will not
be).