User guide

Phone/IP Starter Config.
MultiVOIP Quick Start Guide 20
10. Go to Configuration | Logs.
Select “Enable Console Messages.”
To allow log reports by email (if desired), click
SMTP. Click OK.
To do logging with a SysLog client program, click
on “SysLog Server – Enable” in the Logs screen. To
implement this function, you must install a SysLog
client program. For more info, see the “SysLog
Server Functions” section of the Operation &
Maintenance chapter of the
User Guide.
11. Enable premium (H.450) telephony features.
Go to Supplementary Services. Select any features
to be used.
For Call Hold, Call Transfer, & Call Waiting, specify
the key sequence that the phone user will press to
invoke the feature. For Call Name Identification,
specify the allowed name types to be used and a
caller-id descriptor.
If Call Forwarding is to be used, enable this feature
in the Add/Edit Inbound Phone Book screen.
After making changes, click on OK in the current
configuration screen before moving on to the next
configuration screen.