User guide

Phone/IP Starter Config.
MultiVOIP Quick Start Guide 16
4. Enable Web Browser GUI (Optional). To do
configuration and operation procedures using the
web browser GUI, you must first enable it. To do so,
follow these steps. (Browser must be Internet
Explorer 6.0 or above; or Netscape 6.0 or above.)
A. Be sure an IP
address has been
assigned to the
MultiVOIP unit
(this must be done
in the MultiVOIP
Windows GUI).
B. Save Setup in Windows
GUI.
C. Close the
MultiVOIP
Windows GUI.
D. Install Java program from
MultiVOIP product CD.
(Must be Java Runtime
Environment 1.4.0_01 or
above.)
NOTE: Required on first
use of Web Browser GUI
only.
E. Open web browser.
(Note: The PC being used must be connected to and
have an IP address on the same IP network that the
voip is on.)