User guide

Phone/IP Starter Config.
15 MultiVOIP Quick Start Guide
Phone/IP Starter Configuration
For full details, see
Chapter 6: Technical Configuration for
Analog/BRI MultiVOIPs in User Guide
1. Open MultiVOIP program: Start |MultiVOIP xxx |
Configuration.
2. Go to Configuration | IP. Enter the IP parameters
for your voip site.
3. Do you want to configure and operate the
MultiVOIP unit using the web browser GUI? (It has
the same functionality as the local Windows GUI,
but offers remote access.)
If NO, skip to step 5.
If YES, continue with step 4.