User guide

Chapter 3: MultiVOIP Software
Multi-Tech Systems, Inc. MVPGSM 22
Actions:
• Select Channel
o Select the channel you want to edit
• Disable Interface
o Check box: Enable or Disable Interface
• Use Module for DTMF and Tone Generation
o Check box: Enable or Disable DTMF and Tone generation (this is used in conjunction with out of
band DTMF)
• Enable Caller ID
o Check box: Enable or Disable Caller ID (this determines if Caller ID information coming in from
the wireless network is to be sent over the IP network)
• No Response Timer
o Internal timer for command response time. Range 15-25 seconds; default is 20
• Minimum Signal Quality Required
o Range 0-31
• SIM Pincode
o SIM PIN
 Enter SIM PIN number (this is only necessary in cases where the PIN is required on
power-up)
o SIM PUK
 Enter SIM PIN Unlock Key number (this would only be needed in conjunction with the
above PIN number where 3 incorrect attempts lock an account)
• Modem Setup
o Modem InitString 1-5
 Enter initialization strings (if necessary, internal modem commands can be added)
• Copy Channel (button)
o Copy settings to another channel
• Default (button)
o Reset unit to Factory Default Settings