User guide

Chapter 3: MultiVOIP Software
Multi-Tech Systems, Inc. MVPGSM 17
Basic Setup
With the software now installed, you are ready to get your MultiVOIP GSM set up and working. There are a few
necessary settings that need to be entered in the configuration software to achieve this and they are noted in
the action lists for the categories below. The following chapters will cover all aspects in detail, but here we will
cover the basic configuration needed to start VOIP communications. Below you will find the list of categories
requiring information to be set before VOIP communication will be ready.
⇒ Ethernet/IP
⇒ Voice/Fax
⇒ Wireless Setup
⇒ Call Signaling
⇒ Regional
⇒ Phone Book
This setup process must be followed by a Save & Reboot for the changes to take effect.