User guide

Chapter 6: Using the Software
Multi-Tech Systems, Inc. MVPGSM 118
SysLog Server Functions
Multi-Tech has built SysLog server functionality into the software of the MultiVOIP GSM units. SysLog is a de
facto standard for logging events in network communication systems.
To implement this functionality, you will need a SysLog client program (sometimes referred to as a “daemon”).
SysLog client programs, both paid and freeware can be obtained from Kiwi Enterprises (search the Internet for
kiwi syslog daemon), among other firms. Read the End-User License Agreement carefully and observe license
requirements. SysLog client programs essentially give you a means of structuring console messages for
convenience and ease of use.
Multi-Tech Systems does not endorse any particular SysLog client program. SysLog client programs by qualified
providers should suffice for use with MultiVOIP GSM units.
Before a SysLog client program is used, the SysLog functionality must be enabled within the MultiVOIP GSM in
the Logs menu under Configuration.
Enable SysLog
The IP Address used will be that of the MultiVOIP GSM itself.
In the Port field, entered by default, is the standard (‘well-known’) logical port, 514.
Configuring the SysLog Client Program. Configure the SysLog client program for your own needs. In various
SysLog client programs, you can define where log messages will be saved/archived, opt for interaction with an
SNMP system, set the content and format of log messages, determine disk space allocation limits for log
messages, and establish a hierarchy for the seriousness of messages (normal, alert, critical, emergency, etc.).