User guide

50
MultiVOIP 400/800 User Guide
If your H.323 endpoint is not a MultiVOIP 400/800 (e.g., a PC with Netmeeting software), the
Systems Administrator for your VOIP network should do the following.
1. Make certain that the H.323 endpoint (e.g., PC with Netmeeting, router with voice, etc.) have
been properly connected to the network. Refer to the appropriate end user documentation.
2. Acquire the relevant IP Addresses and/or H323 IDs (H323 IDs are required if Gatekeeper is
enabled) from the other H.323 endpoints that will participate in H.323 calls.
3. Enter these IP Addresses and H323 IDs (H323 IDs are required if Gatekeeper is enabled) in your
phonebook directory.