User guide

39
Chapter 3 - Software Loading and Configuration
48. To configure a stand-alone endpoint (e.g., a PC with Netmeeting software), click Add (+) and the
Add/Edit Phone Entry dialog box is displayed again.
49. Enter the phone number for the stand-alone endpoint in the Station Information group Phone
Number field (e.g., 301).
50. Click inside the Description field and enter a description for the remote MultiVOIP 400/800
phone number. For example, “Human Resources Desk.”
Note: Because the H.323 endpoint is not a MultiVOIP 400/800, the Phone Directory database
ignores the Voice Channel entry, i.e., it does not matter what value is entered.
51. In the Station Identification group, select NO HUNT from the Hunt Group drop-down list, enter
the Human Resource Desk’s IP Address (e.g., 202.198.100.04), and accept the H.323 industry
standard Port value (1720) used to communicate with other H.323 endpoints.
Note: This stand-alone was not configured as part of a Hunt Group. However, depending on your
requirements, you could configure a stand-alone to be part of a Hunt Group.
52. Click OK and you are returned to the Phone Directory Database dialog box which now includes
the stand-alone phone number and related information in the Phone Number list.
53. When you have finished, click OK to download the setup configuration to the MultiVOIP 400/800.