User guide

38
MultiVOIP 400/800 User Guide
43. To add Channel 2 of the Slave MultiVOIP 400/800, click Add (+) and the Add/Edit Phone Entry
dialog box is displayed again.
44. Enter the phone number for the remote (Slave) MultiVOIP 400/800 in the Station Information
group Phone Number field (e.g., 202).
45. Click inside the Description field and enter a description for the remote MultiVOIP 400/800
phone number for Channel 2. For example, “London Office 2.”
46. In the Station Identification group, select HUNT GROUP #2 from the Hunt Group drop-down
list, enter the London Office 2’s IP Address (202.056.039.100), and accept the H.323 industry
standard Port value (1720) used to communicate with other H.323 endpoints.
Note: Depending on your requirements, you may want calls that cannot make a connection to
London Office 1 (Hunt Group #2) to roll over to the New York office instead. In this case, you
would configure that phone entry to be listed as a member of HUNT GROUP #1.
47. Click OK and you are returned to the Phone Directory Database dialog box which now includes
the remote phone number and related information in the Phone Number list.