Specifications

MultiVOIP Gatekeeper Software Guide 5 Calls Window
34
Send Facility Message Dialog Box
To open the Send Facility Message dialog box, click the Send Facility button in the
Calls window. This dialog box lets you edit a Facility message and send the message
to either the source or the destination of the call.
Figure 5-6 Send Facility Message dialog box
You can specify one or more of the following details in the Send Facility Message
dialog box:
CID
The conference ID number.
Reason
The type of Facility message. You can choose from the following:
• gkcciFacilityRsnCallForwarded
Transfers the call to another destination specified by the above address data.
• gkcciFacilityRsnRouteCallToGatekeeper
If an endpoint that operates under a routed-mode Gatekeeper receives a Setup
message directly from another endpoint that is not registered with the Gatekeeper,
the endpoint should send a Facility message to the other point with this reason,
after receiving a routeCallToGatekeeper ARJ from the Gatekeeper. If an endpoint