Specifications

MultiVOIP Gatekeeper Software Guide 4 Endpoints Window

RRQ/URQ Dialog Boxes

The RRQ and URQ dialog boxes open only when the mode for processing the regis-

tration is manual, which you set by clearing the Registration option in the Automatic

Modes box. These dialog boxs display the contents of the current message related to

the endpoint. The message may be sent by the endpoint or to the endpoint by the

Gatekeeper. The RRQ and URQ dialog boxes contain response buttons that corre-

spond to the message type. Some messages require the user or the application to con-

firm or reject the displayed message, and RCF, RRJ, UCF and URJ dialog boxes open

accordingly. Other messages require the user or the application to release the mes-

sage. If you do not choose a response within a time out period, the Gatekeeper rejects

the request.

Note: The above dialog boxes can be bypassed when working in automatic mode.

Predefined Properties Dialog Box

Double-click an endpoint with predefined properties to open the Predefined

Properties dialog box, which displays the predefined details of the endpoint. These

details include endpoint information configured in advance (using this configuration

software) and permanently stored in the Gatekeeper. Unregistration does not affect

the predefined information, which is kept in the Gatekeeper until explicitly deleted.

Figure 4-2 Predefined Properties dialog box