User guide

59
Chapter 8 - Remote Configuration and Management
Multi-Tech Systems, Inc. MultiVOIP User Guide
Verify that the Communication Type is set for COM Port and the Select Port box is
set for the COM port of your local PC.
In the Dial String box, enter the AT command for dialing (ATDT) plus the phone
number of the remote MultiVOIP.
If your Modem Initialization String, Initialization Response, or Connect Response
values are different than the defaults in the dialog box, refer to your modem user
documentation and change the default values to match your modem.
Click OK when you are satisfied with your selections.
6. Run the MultiVOIP Configuration program. Click Start | Programs | MultiVOIP 100 |
MultiVOIP Configuration, or double-click the MultiVOIP Configuration icon in the
program group.
7. The Dialing dialog box displays while software is dialing the remote modem.
8. The Reading Setup dialog box displays.
9. The MultiVOIP 100 Setup menu displays. This is the dialog box of the remote
MultiVOIP. Refer to the online Help provided with your software for a description of
each dialog box and box within a dialog box.
10. After you have changed the configuration of the remote MultiVOIP, click Download
Setup to update the configuration. The remote MultiVOIP will be brought down, the
new configuration written to the unit, and the unit will reboot.
11. Click Exit after the download completes.
12. The Hangup connection? dialog box displays. Click Yes to disconnect the phone
connection to the remote site.
13. If the same telephone number is not going to be used again in the immediate future,
you can remove it from the Port Setup dialog box.