User guide

50
Chapter 7 - Using the MultiVOIP Software
Multi-Tech Systems, Inc. MultiVOIP User Guide
SNMP related operations can be performed only when the SNMP Agent is enabled on this
dialog box. The IP address of the system, such as SNMP Manager that will receive the Traps
from the MultiVOIP should be entered in the IP Address box. The Community Name of the
SNMP Manager receiving the Traps can be a maximum of 19 characters and is case sensitive.
The default Port Number of the SNMP Manager receiving the Traps is 162. The MultiVOIP
currently supports a maximum of two community users at a time, and they can be assigned
either Read/Write or Read-Only rights.
The Password group enables you to enter a password, up to 13 alphanumeric characters, to
be used for Internet Security. Once the password is entered in the MultiVOIP Password box
and confirmed in the Confirm Password box, users will be queried to enter the password
before gaining access to the MultiVOIP. The same password is used for all configuration
methods.
For more information on using these applications, refer to Chapter 8, Remote Configuration.
Viewing Statistics
The Statistics dialog box enables you to view statistics for major events of the MultiVOIP
operation. This dialog box is accessed by clicking Statistics on the Setup menu.
Statistics can be a helpful troubleshooting tool. For example, viewing the Voice Channel
statistics you can see the attempted and completed calls, call duration, average call length,
bytes/packets sent and received, and so on.