User guide

41
Chapter 7 - Using the MultiVOIP Software
Multi-Tech Systems, Inc. MultiVOIP User Guide
Chapter 7 - Using the MultiVOIP Software
This chapter describes various features of the MultiVOIP software that enable you to change
the configuration of your MultiVOIP. The default configuration parameters were entered during
the loading of the software (Chapter 3). The MultiVOIP software and configuration utilities
described in this chapter enable you to change that initial configuration as necessary.
The primary interface to the MultiVOIP software is a main menu (with MultiVOIP 100 Setup in
the title bar) with individual buttons that enable you to quickly and easily select a desired
function. These features are discussed in detail in the MultiVOIP Configuration section later in
this chapter.
The other configuration utilities in the MVP120 software provide additional functionality.
Configuration port setup utility: Change the method by which you access the MultiVOIP
(through a direct connection of a PC to the Command Port on the MultiVOIP, or via your
Internet or LAN connection to the LAN port on the MultiVOIP).
Date and Time setup utility: Set the date and time used for data logging in the MultiVOIP.
Download Factory Defaults: Return the configuration to the original factory settings.
Download Firmware: Download new versions of firmware as enhancements become
available.
Download User Defaults: Download your own default settings or profile.
Download Voice Coders: Download voice coders to the MultiVOIP.
Uninstall MultiVOIP Configuration utility: Remove the MVP120 software from your PC.
Upgrade Software utility: One step upgrade can be performed via serial port or over IP.
Before You Begin
The MultiVOIP software operates in a Microsoft Windows® environment. The MultiVOIP 100
program group contains icons for all the utilities described above. You can access the
individual utility programs either by clicking Start | Programs | MultiVOIP 100 | (utility) .
MultiVOIP Configuration
The MultiVOIP Setup menu enables you to display and change the voice channels and IP
protocol parameters, display and manage the Phone Book listing, view statistics and call
progress, and change features such as SNMP Agent, Telnet Server, WEB Server, and assign a
MultiVOIP password.
The Events window in the lower third of the Setup menu provides information about the boot
process.