User guide

34
Chapter 5 - Configuring the Client MultiVOIPs
Multi-Tech Systems, Inc. MultiVOIP User Guide
9. The Billing/Security tab displays the parameters for billing options, call
authentication, and automatic disconnection.
10. You can set up billing options for inbound and outbound calls by selecting them in the
Billing Options group and then entering the charge in cents per number of seconds.
11. The Call Authentication option enables password protection for outbound and
inbound calls on the voice/fax channel. If you enable password protection on inbound
or outbound calls, you need to also enter a password of up to 14 numeric characters
in the Password box.
12. The Automatic Disconnect option limits call duration to the number of seconds
entered in the Disconnect After box. The default value of 180 seconds can be
changed to any other value up to 65,535 (roughly 18.2 hours).
13. Click the Regional tab to select your specific country/region from the Country/
Region list or to change the Tone Pairs.
The Tone Pairs group parameters change per your selections. Click OK. The
following dialog box displays.