User guide

29
Chapter 4 - Configuring the Host MultiVOIP
Multi-Tech Systems, Inc. MultiVOIP User Guide
Note: If the remote MultiVOIP is located behind a proxy server that uses a
dynamically assigned IP address, select Dynamic (disabling Static IP Address) and
leave the IP Address box blank. The Host MultiVOIP will learn the IP address when
it is contacted by the client MultiVOIP.
34. Enter the IP address of the client MultiVOIP in the IP Address box in the MultiVOIP
Identification group.
35. Click OK and you are returned to the Phone Directory Database dialog box, which
now includes the second number and related information in the Phone Number list.
36. When you have finished, click OK. On the Main Menu, click Download Setup.
37. The Save Setup dialog box displays.
Click OK to proceed.
38. After the setup is written to the MultiVOIP, the unit is rebooted.
39. Verify that the BOOT LED on the MultiVOIP is off after the download is complete.
This may take several minutes as the MultiVOIP reboots.
Note: If the Ethernet connection is not active, none of the LEDs will be on after
booting. This unit does not have a Power LED.
40. You are returned to your MultiVOIP folder which is open and visible on your desktop.
At this time, your host MultiVOIP is configured. Proceed to the next section to configure the
client MultiVOIPs.