User guide

Multi-Tech System’s Inc. MultiVOIP User Guide
Chapter 1 - Introduction and Description
10
for this MultiVOIP. The master MultiVOIP requires a static IP address so that the Client units
know where the Host MultiVOIP is located in the network. The Identified By group defines the
IP address of the MultiVOIP for which the telephone number is being assigned. The Ethernet
Node ID number is the 12-digit Node ID# (0008005xxxxx) that is assigned to every unit during
the manufacturing process and cannot be changed. It is located on the ID plate on the back
panel of the unit.
When you have entered this information in the Add/Edit Phone Entry dialog box, the new
phone number is added to the Phone Directory Database.
Now, to add the phone entry for the Remote Sales Office, you again bring up the Add/Edit
Phone Entry dialog box and add the station information and identification of the Remote
Sales Office MultiVOIP.
The Station Information is entered with the same reasoning as for the Host MultiVOIP. But,
the MultiVOIP Identification for the Remote Sales Office Client unit depends on how it is
used in its network. For instance, if the Client unit is behind a Proxy Server and the Proxy
Server is providing the connection to the Internet and the Proxy Server is using dynamic