User guide

33
Configuring the MultiVOIP
11. Enter the phone number for the stand-alone endpoint in
the Station Information group Phone Number box. For
example, 301.
12. Click inside the Description box and enter a description
for the remote NetMeeting. For example, “Human
Resources Desk”.
Note: Because the H.323 endpoint is not a MVP120, the
Phone Directory database ignores the Voice Channel
entry. It does not matter what value is entered.
13. In the Station Identification group, select NO HUNT from
the Hunt Group list, enter the Human Resource Desk’s IP
Address (202.198.100.04) and accept the H.323 industry
standard Port value (1720) used to communicate with
other H.323 endpoints.
Note: This stand-alone was not configured as part of a
Hunt Group. However, depending on your requirements,
you could configure a stand-alone to be part of a Hunt
Group.
14. Click OK and you are returned to the Phone Directory
Database dialog box which now includes the stand-alone
phone number and related information in the Phone
Number list.