User guide

MultiVOIP Quick Start Guide
36
17. Click Download Setup to write the new configuration to
the client unit. The Save Setup dialog box displays.
18. Select the Save Current Setup as User Default
Configuration check box and click OK. After the setup is
written to the MultiVOIP, the unit reboots.
19. Verify that the Boot LED on the MultiVOIP is off after the
download is complete. This may take several minutes as
the MultiVOIP reboots.
20. You are returned to the main menu.
Your MultiVOIP is operational at this time.
Repeat this procedure for each of the client units. When all
clients have been configured, proceed with deploying the
VOIP network.