User guide

MultiVOIP Quick Start Guide
32
To change the voice coder, select the new voice coder
entry from the Voice Coder list.
If you changed the voice coder, ensure that the same
voice coder is used on the voice/fax channel you are
calling. Otherwise, you will always get a busy signal.
Note: If Automatic Coder is selected, enter the
bandwidth in the Max Bandwidth box. Check with your
Network Administrator to determine available bandwidth.
8. The Fax group enables you to select the maximum baud
rate for faxes and adjust the fax volume. If you do not plan
to send or receive faxes on a given voice/fax channel, you
can disable faxes in the Fax group.
9. The Billing/Security tab displays the parameters for
billing options, call authentication, and automatic
disconnection.