User guide

MultiVOIP Quick Start Guide
30
4. In the Port Address group, enter the IP Address and IP
Mask. In the Gateway Address group, enter the gateway
IP address for the client unit.
The IP address is your unique LAN IP address, and the
Gateway address is the IP address of the device
connected to the Internet/Intranet.
Click OK when you are finished. The Channel Setup
dialog box displays.
5. The Channel Setup dialog box defines the voice coder,
fax parameters, and regional telephone parameters for the
voice/fax channel.
6. Check with your in-house telephone personnel to verify
whether your local PBX dial signalling is Pulse or DTMF
(tone). Select the regeneration option accordingly.