User guide

MultiVOIP Quick Start Guide

38. After the setup is written to the MultiVOIP, the unit is

rebooted.

39. Verify that the BOOT LED on the MultiVOIP is off after the

download is complete. This may take several minutes as

the MultiVOIP reboots.

Note: If the Ethernet connection is not active, none of the

LEDs will be on after booting. This unit does not have a

Power LED.

40. You are returned to your MultiVOIP folder which is open

and visible on your desktop.

At this time, your host MultiVOIP is configured. Proceed to the

next section to configure the client MultiVOIPs.