User guide

MultiVOIP Quick Start Guide

In the Station Information group, enter the unique phone

number of the local device connected to Channel 1 in the

Phone Number box. For example phone number 101.

26. The Description is optional, but can be useful in

associating the channel to the extension.

27. Enter the Voice Channel number corresponding to the

phone number entered.

28. Click the Permit Hunting box if you want calls to roll over

to a second voice/fax channel on an 2, 4, or 8-port client

answering MultiVOIP when the first channel is busy.

Note: Hunting will work between channels on the same

MultiVOIP. However, hunting between channels on

separate MultiVOIPs is not supported in proprietary mode.

Note: The Host MultiVOIP must have a static IP address

that the remote MultiVOIP can reference to obtain a

downloaded copy of the host phone directory database.

29. In the MultiVOIP Identification group, enter the IP

address of the Host MultiVOIP in the IP Address box.

Then obtain the 12-digit Node ID# (0008005xxxxx) from

the ID plate on the back panel of the MultiVOIP and enter

this number in the Ethernet Node ID box. If the ID plate

is missing or damaged, you can also Telnet to the

MultiVOIP and, on the MultiVOIP Telnet Server menu enter

1 to advance to the Main Menu, then enter 3 for System

Information where item 1 is the Ethernet Port Address you

want to enter in the Ethernet Node ID box.