User guide

MultiVOIP Quick Start Guide
18
For FXO-to-FXO communications, you can enable a
specific FXO Disconnect: Fix Current Loss, Tone
Detection, or Silence Detection. Check with your in-
house phone personnel to verify the type of disconnect to
use. If Current Loss is checked, the VOIP will hangup
when it detects a loss of current on the FXO/phone port.
For Tone Detection, select from the drop down list box
one or two tones that will cause the line to disconnect. The
person hanging up the call must then press the key or
keys that produce those tones to hang up a call. For
Silence Detection, select One Way or Two Way. Then
enter in the Silence Timer box the number of seconds of
silence before disconnect. The default value of 15 seconds
may be shorter than desired for your application.
To dedicate the local voice/fax channel to a remote voice/
fax channel, (so you will not have to dial the remote
channel) select the Auto Call Enable check box. Enter
the phone number of the remote VOIP in the Phone
Number box.
16. The Voice/Fax tab displays the parameters for the voice
gain, DTMF (Dual Tone Multi-Frequency) gain, voice
coder, faxing, and advanced features such as Silence
Compression, Echo Cancellation, and Forward Error
Correction.