User guide

54
Chapter 5 - Remote Configuration and Management
7. After you have changed the configuration of the remote MultiVOIP, click Download Setup to
update the configuration. The remote MultiVOIP will be brought down, the new configuration
written to the unit, and the unit will reboot.
8. Click Exit when the downloading is complete.
9. Double-click the MultiVOIP Configuration icon in the program group to verify that the
MultiVOIP is running.
Telnet
A typical Telnet client application is described next. The MultiVOIP has a built-in Telnet Server that
enables Telnet client PCs to access the MultiVOIP. A typical Telnet client is allowed to configure the
MultiVOIP. In addition, the MultiVOIP can be remotely accessed and configured from any where on the
Internet through its Web interface.
MultiVOIP Telnet Server Menu
The MultiVOIP Telnet Server menu provides three basic options: Voice over IP Configuration, Phone
Directory Database, and Phone Directory Configuration. A further option enables you to close the
Telnet session.
Voice over IP Configuration
Selecting Option 1 displays the main menu, which allows further configuration options. These options
include Protocol Stacks (option 1), Applications (option 2), System Information (option 3), and Voice
Channels (option 4). For further descriptions of these options, refer to Chapter 4 - MultiVOIP Software.