User guide

53
Chapter 5 - Remote Configuration and Management
the PC host name. You should also test the network interface configuration by Pinging
another TCP/IP device that is connected to the network.
2. Install the MultiVOIP software on the local PC. When installed click Start | Programs |
MultiVOIP 100 | Configuration Port Setup, or double-click on the Configuration Port
Setup icon in the MultiVOIP 100 program group.
3. The MultiVOIP Port Setup dialog box displays.
Verify that the IP option is selected in the Communication Type group.
In the MultiVOIP IP Address box, enter the IP Address of the remote MultiVOIP.
4. Click OK when you are satisfied with your selections.
5. Run the MultiVOIP Configuration program. Click Start | Programs | MultiVOIP 100 |
MultiVOIP Configuration, or double-click on the MultiVOIP Configuration icon in the
MultiVOIP 100 program group.
6. The MultiVOIP 100 Setup dialog box displays. This is the dialog box of the remote
MultiVOIP. Refer to the online Help provided with your MultiVOIP for the definition of each
dialog box.